Trident AWD/2WD Manual
Extrusion Cut
As 9mm belts are extended a bit, the rear extrusion needs to be filed like this:
We made a printed jig for this, you can download it on github:
Another way is just cut 2.5mm short.
The 2.5x4mm area is what needs to be cut off.
You also need different printed brackets, download here:
https://github.com/MagicPhoenix/MPX-VORON-AWD/tree/main/Printed%20Parts/Trident (opens in a new tab)
Install
A/B Driver
XY Joint
Front Driver
