VORON AWD/2WD Mod
2.4 AWD/2WD Wiring

Voron 2.4 AWD/2WD Wiring

You can find printed parts on our github.

https://github.com/MagicPhoenix/MPX-VORON-AWD (opens in a new tab)

Z Chain Mount / Y Endstop

Note: They are both designed for umbilical, both need M12 cable gland.

You will have to move the buttom Z chain mount to left for more space on A driver tensioner.

D2F MicroSwitch

image-20231107144143215

image-20231107144234646

image-20231107144328197

MPX Y Endstop PCB

image-20231107144930248

image-20231107145028305

image-20231107145148687

Cable Gland

The standard cable gland will come with a m12 nut, we will use it instead of printed threads.

image-20231107145319356

If you have a steel wire, just go through the gland and tighten the nut, it should be able to hold it there.

Front Steppers

Currently there are two ways to wire it, one on the side of Y extrusions, the other way on top of Y extrusions.

On the side of Y extrusions

Print wiring_side_x2.stl

If using this way,you need to make side panels foam thicker, 6mm would be fine.(standard voron is 3mm)

image-20231107150833750

e1a47e86990e5bd72f843efdc9dbdf94

44116ecc3f8dbbd760f7d7b7b989b754

b1a546e418076fa0c491d43ddf7e720b

On top of Y extrusions

Print wiring_top_front.stl and wiring_top_back.stl

image-20231107152127736

image-20231107152234527

image-20231107152358214

image-20231107152420098

image-20231107152441788

2.4 AWD/2WD ManualTuning